K- 07 15 07 91

Kol.stan.lo.Zyl.G3/8"Hub600mm Kol.D63mm

The product image may differ

Modèle 3D

Ø pistone

63 mm

Corsa

600 mm

Filetto dell'attacco

G 3/8″ -19

Téléchargement du PDF

Veuillez saisir une exécution

Afficher le tableau des articles

K- 07 15 07 34 K- 07 15 07 35 K- 07 15 07 36 K- 07 15 07 37 K- 07 15 07 38 K- 07 15 07 39 K- 07 15 07 40 K- 07 15 07 41 K- 07 15 07 42 K- 07 15 07 43 K- 07 15 07 44 K- 07 15 07 45 K- 07 15 07 46 K- 07 15 07 47 K- 07 15 07 48 K- 07 15 07 49 K- 07 15 07 50 K- 07 15 07 51 K- 07 15 07 52 K- 07 15 07 53 K- 07 15 07 54 K- 07 15 07 55 K- 07 15 07 56 K- 07 15 07 57 K- 07 15 07 58 K- 07 15 07 59 K- 07 15 07 60 K- 07 15 07 61 K- 07 15 07 62 K- 07 15 07 63 K- 07 15 07 64 K- 07 15 07 65 K- 07 15 07 66 K- 07 15 07 67 K- 07 15 07 68 K- 07 15 07 69 K- 07 15 07 70 K- 07 15 07 71 K- 07 15 07 72 K- 07 15 07 73 K- 07 15 07 74 K- 07 15 07 75 K- 07 15 07 76 K- 07 15 07 77 K- 07 15 07 78 K- 07 15 07 79 K- 07 15 07 80 K- 07 15 07 81 K- 07 15 07 82 K- 07 15 07 83 K- 07 15 07 84 K- 07 15 07 85 K- 07 15 07 86 K- 07 15 07 87 K- 07 15 07 88 K- 07 15 07 89 K- 07 15 07 90 K- 07 15 07 91 K- 07 15 07 92 K- 07 15 07 93 K- 07 15 07 94 K- 07 15 07 95 K- 07 15 07 96 K- 07 15 07 97 K- 07 15 07 98

Enregistrez-vous maintenant pour accéder à notre boutique en ligne.

Notre service clientèle : +41-31-917454-5

Détails produit concernant

K- 07 15 07 91

Ø pistone

63 mm

Corsa

600 mm

Filetto dell'attacco

G 3/8″ -19

carico laterale max.

8.0 Nm

Caractéristiques

Pressione di lavoro

1 to 8 bar

Guarnizione

NBR per velocità fino a un massimo di 1 m/s

Slitta (guida pistone)

aluminium alloy, anodised

nastro interno/esterno

acciaio inossidabile

Alloggiamento

profiled tube from aluminium, anodised

Campo della temperatura:

-15 °C a +80 °C

Mezzi

aria compressa, non oliata o oliata filtrata (50 μm)

Customs tariff number

84123100

Toutes les caractéristiques

Description du produit

Remarques

Altri dati su richiesta.

Description

These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.

Informations complémentaires

Important: The scope of supply does not include a connector. Please order separately.

Remarque relative à la commande

All strokes can also be supplied in 1 mm steps on request. Ø 16 to 5000 mm, Ø 25, 32, 40 to 5700 mm and Ø 63 to 5500 mm. Versions with an integrated linear guide can be supplied on request (up to 50 x lateral load).