PR 15-2.5 ST52

Hydraulikrohr 15 x 2,5 mm, nahtlos, ST52

The product image may differ

Ø d1

15 mm

2.5 mm

Caso di carico I :

531 bar

Téléchargement du PDF

Veuillez saisir une exécution

Afficher le tableau des articles

PR 10-1.5 ST52 PR 12-1.5 ST52 PR 12-2 ST52 PR 15-1.5 ST52 PR 15-2 ST52 PR 15-2.5 ST52 PR 16-2 ST52 PR 16-2.5 ST52 PR 18-2 ST52 PR 18-2.5 ST52 PR 20-2 ST52 PR 20-2.5 ST 52 PR 20-3 ST52 PR 22-2 ST52 PR 22-2.5 ST 52 PR 22-3 ST52 PR 25-2 ST52 PR 25-2.5 ST 52 PR 25-3 ST52 PR 25-4 ST52 PR 28-2 ST52 PR 30-3 ST52 PR 30-4 ST52 PR 35-3 ST52 PR 35-4 ST52 PR 38-2.5 ST 52 PR 38-3 ST52 PR 38-4 ST52 PR 40-4 ST52 PR 42-2 ST52 PR 42-3 ST52 PR 50-6 ST52 PR 50-8 ST52 PR 60-6 ST52 PR 60-7 ST52 PR 60-10 ST52 PR 65-8 ST52 PR 80-4 ST52 PR 80-10 ST52

Enregistrez-vous maintenant pour accéder à notre boutique en ligne.

Notre service clientèle : +41-31-917454-5

Détails produit concernant

PR 15-2.5 ST52

Ø d1

15 mm

2.5 mm

Caso di carico I :

531 bar

Caso di carico III :

443 bar

Ø d2

10 mm

Tolleranza DE +/-

0.08 mm

Tolleranza DI +/-

0.12 mm

Toutes les caractéristiques

Caractéristiques

Esecuzione

metrico

Materiale

acciaio E355+N (1.0580)

Norma

DIN EN 10305-4

Protezione superficiale

fosfatato ed oliato

Tipo

Precision steel tube, seamless (cold drawn)

Tipo aggiuntivo

(+N) = normalised annealed

Lunghezza tubo

6 metri

Toutes les caractéristiques

Description du produit

Remarques

Le indicazioni della pressione riportate si riferiscono a un tubo diritto.
Per i tubi curvati si devono calcolare gli spessori corrispondenti delle pareti analogamente alla DIN EN 13480-4.

Description

The steel pipes in the PR ZP, PR VZ CF PR and PR ST 52 series are supplied in the +N condition (normalised annealed) as standard. This delivery condition ensures excellent bendability and is the established standard for use in hydraulic piping systems, particularly during assembly and installation.

Informations complémentaires

Calcolo analogo alla DIN 2413
Specific load I: static (up to 120 °C)
Specific load III: dynamic (up to 120°C)
Working stroke= P bar
Strength parameter: K 355 [N/mm²]
Safety coefficient: S 1.5
Fatigue strength: σSch/D 240 [N/mm²]
Tolerances: DIN EN 10305-1 (diameter-/wall thickness indication)

Remarque relative à la commande

Other delivery conditions such as +C, +A or +SR are available on request and must be specified separately.